Repair Procedures: Adjustment

WARNING: This page is about a different car, the 2015 Kia Forte5 and 2015 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.

Place the shift lever in the interior and the transmission manual control lever to the N position.
Install the shift cable (A).

Fig 1: Installing Shift Cable
Courtesy of KIA MOTORS AMERICA, INC.
Lightly push the shift cable towards "F" to tighten the cable.
Tighten the nut (A) to the specified torque.
Tightening Torque:

9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

Fig 2: Locating Shift Cable Nut
Courtesy of KIA MOTORS AMERICA, INC.
After adjusting, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of room lever.