Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte5 and 2015 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
Disconnect the accelerator position sensor connector (A).

Fig 1: Accelerator Position Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the mounting bolt (B), the nuts (C) and then remove the accelerator pedal module.

Fig 2: Accelerator Pedal Module Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Accelerator Pedal Module Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.