FixVault
Home › Kia › 2015 › K900 V6 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Injector Drive Box (IDB) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch off and disconnect the battery negative (-) terminal.
  2. Disconnect the injector drive box (IDB) connector (A).
  3. Remove the IDB assembly after removing the bolts (B) and the nuts (C).
    Fig 1: Identifying IDB Connector And Bolts
    G10716988Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Identifying IDB
    G10716989Courtesy of KIA MOTORS AMERICA, INC.
About FixVault