FixVault
Home › Kia › 2015 › K900 V8 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Power Trunk Module › Power Trunk Module Drive Unit › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the LHS trunk trim after opening the trunk.

    (Refer to Body - "TRUNK TRIM ".)

  3. Remove motor connector from wiring harness.
  4. Connect the motor terminals directly to battery voltage (12V) to check that the motor operates smoothly. Then, reverse the polarity and check for smooth operation. Replace the motor if the operation is abnormal.
    Fig 1: Identifying Motor And Connector Terminals
    G10715874Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Motor Terminals Position Chart
    G10715875Courtesy of KIA MOTORS AMERICA, INC.
About FixVault