FixVault
Home › Kia › 2015 › K900 V8 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Identifying Crankshaft Position Sensor Connector
    G10713725Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the sensor (B) after removing the installation bolt (A).
    Fig 2: Identifying CKPS Installation Bolt
    G10713726Courtesy of KIA MOTORS AMERICA, INC.
About FixVault