FixVault
Home › Kia › 2015 › K900 V8 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 1/Sensor 1]

[Bank 1/Sensor 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the heated oxygen sensor connector.
  3. Lift the vehicle.
  4. Remove the rear under cover (A).
    Fig 1: Identifying Rear Under Cover
    G10713745Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the RH front muffler.

    (Refer to Engine Mechanical System - "MUFFLER ")

  6. Remove the heater protector (B) from the catalytic converter after removing the bolt (A).
  7. Remove the heated oxygen sensor (C) with the spanner after lifting the heater protector (B).
    Fig 2: Identifying Heated Oxygen Sensor
    G10713746Courtesy of KIA MOTORS AMERICA, INC.
About FixVault