FixVault
Home › Kia › 2015 › Rio LX, 4D Hatchback, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Idle Stop & Go (ISG) System › Seat Belt Switch › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Remove the connector from the switch.
  2. Check for continuity between terminals.
Seat belt condition Continuity
Fastened Non-conductive (∞Ω)
Not fastened Conductive (Ω)
Fig 1: Identifying Seat Belt Switch
G08321542Courtesy of KIA MOTORS AMERICA, INC.
About FixVault