Repair Procedures: Removal: Notes

NOTE: Take care not to scratch the crash pad and related parts.

1. Disconnect the negative (-) battery terminal.
2. Remove the glove box housing.

   (Refer to Body - "GLOVE BOX HOUSING ")

3. Remove the multi box assembly (A) after loosening the screw.
   Fig 1: Multi Box Assembly With Screw

   Courtesy of KIA MOTORS AMERICA, INC.
4. Disconnect the blower motor connector (A) and clip (B).
   Fig 2: Blower Motor Connector And Clip

   Courtesy of KIA MOTORS AMERICA, INC.
5. Disconnect the BCM & Receiver unit connectors (A).
   Fig 3: BCM & Receiver Unit Connectors

   Courtesy of KIA MOTORS AMERICA, INC.
6. Disconnect the mounting clip (A) and then remove the receiver (B) after loosening the nut.
   Fig 4: Receiver And Mounting Clip

   Courtesy of KIA MOTORS AMERICA, INC.
7. Remove the BCM & Receiver unit (A) after loosening the nuts.

Fig 5: BCM & Receiver Unit With Nuts

Courtesy of KIA MOTORS AMERICA, INC.