FixVault
Home › Kia › 2015 › Sedona EX › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Troubleshooting › Communication With Gds Is Not Possible. (Communication With Abs Only Is Not Possible) › Check The Power Source Of ESC Control Module

Check The Power Source Of ESC Control Module

  1. Disconnect the connector from the ESC control module.
  2. Turn the ignition switch ON, and measure the voltage between terminal 29 of the ESC control module harness side connector and body ground.

    Specification:  approximately B+

    Fig 1: Measuring Voltage Between ESC Control Module Harness Side Connector Terminal And Body Ground
    G10649729Courtesy of KIA MOTORS AMERICA, INC.
  3. Is voltage within specification?

    YES 

    • Check for poor ground.

    NO 

    • Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ESC control module. Repair if necessary.
About FixVault