DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Start Test: Monitors the difference between max and min IAT in order to detect movement in IAT for a certain time Drive test: Performs the max and min delta check while driving under load for a length of time followed by an idle for a certain	Poor connection Short to ground in harness IATS PCM
Enable Conditions	Engine soaked time greater than 360min Engine Running State No fault present IAT stored previous trip No IAT Tests pending
Threshold Value	Max IAT - Min IAT less than 1.5°C(34.7°F)
Diagnostic Time	Continuous (10 min.)
Mil On Condition	NO MIL ON(DTC only)