FixVault
Home › Kia › 2015 › Sedona L › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Rear Wheel Speed Sensor › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the rear wheel speed sensor connector (A).
    Fig 1: Rear Wheel Speed Sensor Connector
    G10649744Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the rear wheel speed sensor.

    (Refer to Driveshaft and Axle - "REAR HUB - CARRIER ")

  3. Install in the reverse order of removal.
About FixVault