FixVault
Home › Kia › 2015 › Sedona L › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Barometric Pressure Sensor (BPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the barometric pressure sensor connector (A).
  3. Remove the mounting bolt (B) and then remove the sensor from the air cleaner assembly.
Fig 1: Barometric Pressure Sensor Connector And Mounting Bolt
G10648850Courtesy of KIA MOTORS AMERICA, INC.
About FixVault