FixVault
Home › Kia › 2015 › Sedona SX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Accelerator Position Sensor (APS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (B) and then remove the accelerator pedal module.
    Fig 1: Accelerator Position Sensor Connector And Nuts
    G10648901Courtesy of KIA MOTORS AMERICA, INC.
About FixVault