CVVT Oil Control Valve (Intake)

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the intake manifold.
(Refer to "INTAKE MANIFOLD ")
Disconnect the CVVT oil control valve connector (A).
Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1]

Fig 1: CVVT Oil Control Valve Connector And Installation Bolt (Intake Bank 1)
Courtesy of KIA MOTORS AMERICA, INC.

[Bank 2]

Fig 2: CVVT Oil Control Valve Connector And Installation Bolt (Intake Bank 2)
Courtesy of KIA MOTORS AMERICA, INC.