FixVault
Home › Kia › 2015 › Soul + › Repair and Diagnosis › Engine Performance › Engine Control Systems › Idle Stop & Go (ISG) System - 2.0L › Brake Switch › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF.
  2. Remove the crash pad lower panel. (Refer to the CRASH PAD )
  3. Disconnect the stop lamp switch connector (A).
    Fig 1: Identifying Stop Lamp Switch Connector
    G09779387Courtesy of KIA MOTORS AMERICA, INC.
About FixVault