FixVault
Home › Kia › 2015 › Soul Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Accelerator Position Sensor (APS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector.
  3. Remove the mounting nuts.
  4. Remove the cap (A)
    Fig 1: Identifying Cap
    G09773006Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the mounting bolt (A), and then remove the accelerator pedal module.
    Fig 2: Identifying Accelerator Pedal Module Mounting Bolt
    G09773007Courtesy of KIA MOTORS AMERICA, INC.
About FixVault