FixVault
Home › Kia › 2015 › Soul Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the engine room under cover.

    (Refer to "ENGINE ROOM UNDER COVER ")

  3. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
    Fig 1: Identifying Crankshaft Position Sensor Connector And Sensor
    G09772973Courtesy of KIA MOTORS AMERICA, INC.
About FixVault