FixVault
Home › Kia › 2015 › Soul Base, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 117 (Electronic Stability Program (Esp) System) › Rear Wheel Speed Sensor › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel & tire.

    Tightening Torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  2. Remove the rear wheel speed sensor.

    (Refer to Driveshaft and axle - "REAR HUB - CARRIER ")

  3. Install in the reverse order of removal.
About FixVault