FixVault

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2015 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes(DTC)  " mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is the concern still present?

    YES 

    • Go to applicable troubleshooting procedure.

    NO 

    • The system is operating correctly at this time.