Error Handling

WARNING: This page is about a different car, the 2015 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

LIN BUS Off error case

Section	Error recognition condition	Error releasing condition
Initial Routine	LIN BUS OFF is sensed once	Error is not released in initial mode.
Normal Routine	LIN BUS OFF is sensed four times in a row	The fault is released when BCM or LIN Master senses LIN BUS ON four times in a row in normal mode

Remark:
1. When counting fault, output message or signal should be transmitted in the Last Valid value.
2. If an Error occurs in initial mode, fault buzzer (BCM) and fault display (Cluster) are operated.
3. If an Error occurs in normal mode, fault is displayed only on Cluster without buzzer.

Sensor fault (LIN Msg: 0x08)

Section	Error recognition condition	Error releasing condition
Initial Routine	Sensor fault Message is sensed once	Error is not released in initial mode.
Normal Routine	Sensor fauly Message is sensed four times in a row	The fault is released when BCM or LIN Master senses LIN BUS ON four times in a row in normal mode

When displaying fault, RCR/RCL indicator is displayed individually.
Remark:
1. When counting fault, output message or signal should be transmitted in the Last Valid value.
2. If an Error occurs in initial mode, fault buzzer (BCM) and fault display (Cluster) are operated.
3. If an Error occurs in normal mode, fault is displayed only on Cluster without buzzer.
4. If an Error occurs in direct condition, the sensors send the same status of error as in indirect condition.

Alarm level		No Alarm
Indicator display	Left	-
	Right	-
	Center	-