FixVault
Home › Kia › 2015 › Soul Base, Automatic Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 16 (Engine Control System - 2.0L) › Engine Coolant Temperature Sensor › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Remove the ECTS (Refer to "REMOVAL ").
  3. After immersing the thermistor of the sensor into engine coolant, measure the resistance between the ECTS terminal 3 and 4.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

About FixVault