FixVault
Home › Kia › 2016 › Cadenza Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control Module (BCM) › Repair procedures › Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A).
    Fig 1: Removing Crash Pad Lower Panel
    G11785892Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the Reinforcing panel after loosening the mounting bolt and nut. (Refer to Body - "CRASH PAD ")
  4. Disconnect the IPM connectors, loosening the nuts (2EA) and bolt (1EA).
    Fig 2: Disconnecting IPM Connectors
    G11785893Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the rear connector, and then remove the IPM.
About FixVault