Repair Procedures: Installation

1. Install the #1, #2 cylinder bore water jacket separators (A).
   Fig 1: Installing Cylinder Bore Water Jacket Separators

   Courtesy of KIA MOTORS AMERICA, INC.
   NOTE: Insert the separator align with block inner side protrusion, and it must be located under the cylinder head installing surface.
   Fig 2: Inserting Separator Align With Block Inner Side Protrusion (1 Of 2)

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 3: Inserting Separator Align With Block Inner Side Protrusion (2 Of 2)

   Courtesy of KIA MOTORS AMERICA, INC.
2. Install the LH/RH cylinder head assembly and gasket.

(Refer to Cylinder Head Assembly - "CYLINDER HEAD ")