FixVault
Home › Kia › 2016 › Cadenza Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Fuel Tank Pressure Sensor (FTPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the floor mat in the trunk.
  3. Remove the service cover (A).
    Fig 1: Locating Service Cover
    G11784084Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the fuel tank pressure sensor connector.
  5. Remove the fuel tank pressure sensor (A) after releasing the hooks vertically.
Fig 2: Locating Fuel Tank Pressure Sensor
G11784085Courtesy of KIA MOTORS AMERICA, INC.
About FixVault