FixVault
Home › Kia › 2016 › Cadenza Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Purge Control Solenoid Valve (PCSV) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the valve from the bracket.
Fig 1: Locating Purge Control Solenoid Valve Connector
G11784100Courtesy of KIA MOTORS AMERICA, INC.
About FixVault