FixVault
Home › Kia › 2016 › Cadenza Base › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System › Fuel Pump Control Module (FPCM) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Remove the fuel pump control module mounting bolts (A).
    Fig 1: Locating Fuel Pump Control Module Mounting Bolts
    G11784167Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the fuel pump control module connector (A), and then remove the module (B) from the vehicle.
Fig 2: Locating Fuel Pump Control Module Connector
G11784168Courtesy of KIA MOTORS AMERICA, INC.
About FixVault