FixVault
Home › Kia › 2016 › Cadenza Limited › Repair and Diagnosis › Body & Frame › Windows › Power Windows › Power Window Switch › Repair procedures › Removal › Rear Power Window Switch

Rear Power Window Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim panel.

    (Refer to Body - "REAR DOOR ")

  3. Disconnect the connector from the power window switch module.
    Fig 1: Disconnecting Connector From Power Window Switch Module
    G11786065Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power window switch module (A) from the door trim after loosening the mounting screws (13EA).
    Fig 2: Removing Power Window Switch Module From Door Trim Mounting Screws
    G11786066Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the module (A) from the sub box assembly.
About FixVault