FixVault
Home › Kia › 2016 › Forte EX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Intake Air Temperature Sensor (IATS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
Fig 1: Locate Manifold Absolute Pressure Sensor Connector And Installation Bolt
G11796914Courtesy of KIA MOTORS AMERICA, INC.
About FixVault