FixVault

Rear Power Window Switch Inspection

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim panel.

    (Refer to "REAR DOOR TRIM ")

  3. Disconnect the 8P connector from the switch.
    Fig 1: Rear Power Window Switch Connector End View
    G09744416Courtesy of KIA MOTORS AMERICA, INC.
  4. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 2: Checking For Continuity Between Terminals
    G09744417Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the power window switch (A) after loosening the screws.
    Fig 3: Rear Power Window Switch
    G09744418Courtesy of KIA MOTORS AMERICA, INC.