Replacement Of Component Parts
WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
When replacing the system component parts, supply the following amount of oil to the component parts to be installed.
| Component Parts To Be Installed | Amount Of Oil |
|---|---|
| Evaporator | 50 cc (1.70 fl.oz) |
| Condenser | 30 cc (1.02 fl.oz) |
| Receiver-drier | 30 cc (1.02 fl.oz) |
| Refrigerant line (One piece) | 10 cc (0.34 fl.oz) |
For compressor replacement, subtract the volume of oil drained from the removed compressor from the specified volume, and drain the calculated volume of oil from the new compressor:
The specified volume - volume of removed compressor = volume to drain from the new compressor.
NOTE:
Even if no oil is drained from the removed compressor, don't drain more than 50cc from the new compressor.