FixVault
Home › Kia › 2016 › Forte EX › Repair and Diagnosis › External Pages › Different variant/trim › Section 9 (Engine Control System - 1.8L) › Engine Coolant Temperature Sensor (ECTS) › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the ECTS connector.
  3. Remove the ECTS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 1 and 3.
  5. Check that the resistance is within the specification.

    Specification:  Refer to "Specification "

About FixVault