FixVault
Home › Kia › 2016 › Forte Koup SX, Automatic Trans › Repair and Diagnosis › Engine Performance › Ignition System › Ignition System - 1.6L › Ignition Coil › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connector (A).
    Fig 1: Disconnect Ignition Coil Connector
    G11794646Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pull Ignition Coil Connector Lock Pin
    G11794647Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the ignition coil (A).
Fig 3: Remove Ignition Coil
G11794648Courtesy of KIA MOTORS AMERICA, INC.
About FixVault