FixVault
Home › Kia › 2016 › Forte LX, Automatic Trans › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Idle Stop & Go (ISG) System - 1.8L › Brake Switch › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF.
  2. Remove the crash pad lower panel. (Refer to the Remove Crash Pad Body group - "Crash Pad")
  3. Disconnect the stop lamp switch connector (A).
Fig 1: Locate Stop Lamp Switch Connector
G11793953Courtesy of KIA MOTORS AMERICA, INC.
About FixVault