FixVault
Home › Kia › 2016 › Forte LX, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.8L › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor after removing the installation bolt.
Fig 1: Locate Crankshaft Position Sensor Connector
G11793839Courtesy of KIA MOTORS AMERICA, INC.
About FixVault