FixVault
Home › Kia › 2016 › Forte LX, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.8L › ETC (Electronic Throttle Control) System › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to REMOVAL AND INSTALLATION .
  3. Disconnect the ETC module connector (A).
    Fig 1: Disconnect ETC Module Connector
    G11793819Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 2: Locate ETC Module From Engine
G11793820Courtesy of KIA MOTORS AMERICA, INC.
About FixVault