DTC Information: DTC Detecting Condition

Condition	Detecting Condition	Possible Cause
DTC Strategy	Monitoring deviation between target idle speed and actual engine speed	Restriction in intake or exhaust system Contact resistance in connectors Faulty ETC
Enable Conditions	Engine Coolant Temperature (ECT) > 165°F Time elapsed after (pedal value = 0% and vehicle speed = 0mph) Does not activate at Auto stop mode (ISG system) 11< Battery voltage <16
Threshold Value	Target RPM - Current RPM > 100rpm Engine speed too Low
Diagnostic Time	17 sec.
Mil On Condition	2 driving cycle