FixVault
Home › Kia › 2016 › Forte LX, Automatic Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 6 (Engine Control System - 2.0L) › Engine Coolant Temperature Sensor (ECTS) › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Locate Engine Coolant Temperature Sensor Connector
    G11796918Courtesy of KIA MOTORS AMERICA, INC.
  3. Supplement the engine coolant (Refer to REFILLING AND BLEEDING
About FixVault