FixVault
Home › Kia › 2016 › Forte LX, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.8L › Variable Charge Motion Actuator (VCMA) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Locate VCMA Connector
    G11793905Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the VCMA (A) after removing 3 installation bolts.
Fig 2: Locate VCMA Installation Bolts
G11793906Courtesy of KIA MOTORS AMERICA, INC.
About FixVault