Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery (A) and ECM (B).

Fig 1: Battery & ECM
Courtesy of KIA MOTORS AMERICA, INC.
Remove the master cylinder.
(Refer to MASTER CYLINDER )
Remove the snap pin (A) and clevis pin (B).

Fig 2: Snap Pin & Clevis Pin
Courtesy of KIA MOTORS AMERICA, INC.
Remove the mounting nuts (A).
Tightening Torque:

16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

Fig 3: Brake Booster Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the vacuum hose (A) from the brake booster.

Fig 4: Vacuum Hose & Brake Booster
Courtesy of KIA MOTORS AMERICA, INC.
Remove the brake booster (B).