Repair Procedures: Installation

WARNING: This page is about a different car, the 2016 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - "DRIVE BELT ")

Alternator Installation Bolt:

[M10] 29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 lb-ft)

[M8] 21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 lb-ft)

Alternator Brace Mounting Bolt:

21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 lb-ft)