Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
Disconnect the accelerator position sensor connector (A).

Fig 1: Accelerator Position Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the mounting bolt (B), the nuts (C) and then remove the accelerator pedal module.

Fig 2: Locate Accelerator Pedal Module Mounting Bolts

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Locate Accelerator Pedal Module Mounting Nuts

Courtesy of KIA MOTORS AMERICA, INC.