FixVault
Home › Kia › 2016 › Forte5 SX, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Waste Gate Solenoid Valve (WGV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the waste gate solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the waste gate solenoid valve.
  4. Remove the waste gate valve (D) by loosening the bolt (C).
Fig 1: Loosen Waste Gate Solenoid Valve (WGV) Bolt
G11794941Courtesy of KIA MOTORS AMERICA, INC.
About FixVault