Repair Procedures: Removal

Turn Ignition Switch OFF and disconnect the battery negative (-) terminal.
Remove the cover.
Disconnect the ECM connector (A) and the TCM connector (B).

Fig 1: Locating ECM Connector And TCM Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the ECM & TCM bracket mounting bolts (A) and nut (B).

Fig 2: Locating ECM, TCM Bracket Mounting Bolts And Nut
Courtesy of KIA MOTORS AMERICA, INC.
After removing the mounting bolts (A), remove the ECM (B) from the bracket.

Fig 3: Locating ECM And Mounting Bolts

Courtesy of KIA MOTORS AMERICA, INC.