FixVault
Home › Kia › 2016 › K900 V6 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Injector Drive Box (IDB) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the injector drive box (IDB) connector (A).
  3. Remove the IDB assembly after removing the bolts (B) and the nuts (C).
Fig 1: Locating Injector Drive Box Connector, Bolt And Nuts
G11804927Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Locating IDB Assembly
G11804928Courtesy of KIA MOTORS AMERICA, INC.
About FixVault