FixVault

Repair Procedures: Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Connect the GDS to the Data Link Connector (DLC).
  2. Turn the ignition switch ON.
  3. Check the GDS service data of the sensor.
    • EV Mode (Engine clutch not operating)

      Clutch Oil Pressure:  approx. 0

      Fig 1: Screen Display - Engine Clutch Fluid Pressure(EV Mode)
      G11818671Courtesy of KIA MOTORS AMERICA, INC.
    • HEV Mode (Engine clutch operating)

      Clutch Oil Pressure:  above 0

    Fig 2: Screen Display - Engine Clutch Fluid Pressure (HEV Mode)
    G11818672Courtesy of KIA MOTORS AMERICA, INC.