FixVault
Home › Kia › 2016 › Optima EX › Repair and Diagnosis › External Pages › Different variant/trim › Section 71 (Blower System (HEV)) › PWM Blower Module › Repair Procedures › Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad lower cover (A).
    Fig 1: Removing Main Crash Pad Lower Cover (A)
    G11818549Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the PWM blower module connector (A) and then remove the PWM blower module (B) after loosening the mounting screws.
    Fig 2: Locating PWM Blower Module Connector
    G11818550Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse order of removal.
About FixVault