FixVault
Home › Kia › 2016 › Optima Hybrid › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (HEV) › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › Bank 1/Exhaust

Bank 1/Exhaust

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the hanger and the protector.
  4. Remove the mounting bolt (B), and then remove the sensor.
Fig 1: Locating Camshaft Position Sensor Connector And Mounting Bolt - (Bank 1/Exhaust)
G11815759Courtesy of KIA MOTORS AMERICA, INC.
About FixVault