Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
- In case of the windshield with reflection layer which reflects the infrared rays in sensing field, remove the reflection layer from the rain sensor mounting position prior to installation.
- Avoid contamination of the sensor during installation.
- Install the rain sensor bracket to the windshield glass using the tape.
Courtesy of KIA MOTORS AMERICA, INC.
CAUTION: It is very important that the coupling pad pushes against the windshield completely to prevent bubbles from forming at the contact surface. - Connect the rain sensor connector, and then install the sensor cover.