FixVault
Home › Kia › 2016 › Optima LX › Repair and Diagnosis › External Pages › Different variant/trim › Section 60 (Body Control Module (BCM) (HEV)) › Body Control Module (BCM) › Repair Procedures › Trouble Diagnostics When Using GDS › Removal

Trouble Diagnostics When Using GDS: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A).
    Fig 1: Removing Crash Pad Lower Panel
    G11817910Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the reinforce panel after loosening the mounting bolts.
  4. Remove the duct (A) after removing the screw.
    Fig 2: Removing Duct
    G11817911Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the accelerator pedal module.

    (Refer to the Removal .)

  6. Remove the body control module after loosening nut (1EA) and screw (1EA) and disconnecting the connectors (A).
Fig 3: Removing Accelerator Pedal Module
G11817912Courtesy of KIA MOTORS AMERICA, INC.
About FixVault