Repair Procedures: Removal

Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Terminal.
Remove the engine room under cover.
(Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")
Remove the starter cover (A) after loosening the mounting bolt and nut.

Fig 1: Locating Starter Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the starter cable (B) from the B terminal on the solenoid, then disconnect the connector (A) from the S terminal.

Fig 2: Disconnecting Starter Cable From Terminal
Courtesy of KIA MOTORS AMERICA, INC.
Remove the starter mounting blots (A), then remove the starter (B).
Starter Mounting Bolt:

49.0 ~ 63.7 Nm (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

Fig 3: Removing Starter
Courtesy of KIA MOTORS AMERICA, INC.